VESA Adapters

Connect compatible screens and mounts

Pattern extension

Measure both mounting patterns in millimetres. Compare the input and output patterns, plate or strip dimensions, and the exact supported combinations.

Device-specific adapters

A model-specific adapter may fit only certain screen models or versions. Check the full device reference, not just the screen size or brand.

Bolt and clearance checks

Confirm screw diameter, usable depth and spacer requirements. Make sure the adapter leaves connectors, ventilation and the mounting interface accessible.

Before you order

The screen, adapter, mount and supporting structure must all be suitable for the assembled installation. Use the lowest applicable load limit, including any effect of extra weight or distance from the mounting surface.

Record both sides of the connection

Write down the mounting pattern on your screen and the pattern accepted by your existing bracket. VESA measurements are expressed as horizontal by vertical spacing in millimetres. Compare the complete pair of patterns with the adapter specification. An extension strip, a plate adapter and a device-specific adapter can solve different connection problems, so choose the exact type required rather than relying on the word universal.

Check the assembled geometry

An adapter can change the location of the screen relative to the mounting plate. Consider the added thickness, weight and clearance around the rear housing. Make sure the final arrangement leaves ventilation slots and connectors accessible. Check that the bracket can still tilt or turn as intended without the adapter touching another component. Use the specified screws and spacers, with engagement suitable for the television’s mounting points.

Know when an adapter is unsuitable

An adapter should not be used to make an overloaded mount appear compatible. It cannot establish the strength of a wall or correct an unsupported fixing method. Device-specific products also need an exact model match; a similar housing is not proof of compatibility. If you cannot confirm both connections and the permitted load, contact Wolff Mount with the screen model, bracket model and measured mounting patterns before ordering.

Common question

Can an adapter increase the bracket’s capacity? No. Use it only for the stated connection and keep within the limits of every part of the installation.

Need a second check? contact Wolff Mount with your device model, measurements and installation details.